Camera,Lens,Flash,Tripod and others,Singapore Physical + Online store!

9pcs Color Correction Flash Color Gels

Color Correction Flash Color Gels
This gel pack contains 1 each of the following Rosco gels and Velcro adhesive:

Color Correction Gels
• Full CTO (converts 5500K to 2900K)
• 1/2 CTO (converts 5500K to 3800K)
• 1/4 CTO (converts 5500K to 4500K)
• Full CTB (converts 5500K to 7800K)
• 1/2 CTB (converts 5500K to 6400K)
• 1/4 CTB (converts 5500K to 5800K)
• Full Plusgreen (converts 5500K to roughly match fluorescent)
• 1/2 Plusgreen (converts 5500K to roughly match fluorescent)
• 1/4 Plusgreen (converts 5500K to roughly match fluorescent)


Velcro Adhesive
• 7.5" x 3/4" strip of Velcro (soft "Loop" side of Velcro) to stick onto your flash
• 9 Velcro dots (rough "Hook" side of Velcro) to stick onto the ends of your gels.

20.00 $

Check our items

9pcs Special Effects Flash Color Gels

Special Effects Flash Color Gels
This gel pack contains 1 each of the following Rosco gels and Velcro adhesive:

Special Effect Gels
• 1/2 Stop Neutral Density
• 1 Stop Neutral Density
• 2 Stop Neutral Density
• Red
• Primary Green
• Yellow
• Magenta
• Light Blue
• Dark Blue

Velcro Adhesive
• 7.5" x 3/4" strip of Velcro (soft "Loop" side of Velcro) to stick onto your flash
• 9 Velcro dots (rough "Hook" side of Velcro) to stick onto the ends of your gels.

20.00 $

18pcs Color Correction and Special Effects Flash Color Gels

Color Correction and Special Effects Flash Color Gels
This gel pack contains 1 each of the following Rosco gels and Velcro adhesive:

Color Correction Gels
• Full CTO (converts 5500K to 2900K)
• 1/2 CTO (converts 5500K to 3800K)
• 1/4 CTO (converts 5500K to 4500K)
• Full CTB (converts 5500K to 7800K)
• 1/2 CTB (converts 5500K to 6400K)
• 1/4 CTB (converts 5500K to 5800K)
• Full Plusgreen (converts 5500K to roughly match fluorescent)
• 1/2 Plusgreen (converts 5500K to roughly match fluorescent)
• 1/4 Plusgreen (converts 5500K to roughly match fluorescent)

Special Effect Gels
• 1/2 Stop Neutral Density
• 1 Stop Neutral Density
• 2 Stop Neutral Density
• Red
• Primary Green
• Yellow
• Magenta
• Light Blue
• Dark Blue

Velcro Adhesive
• 7.5" x 3/4" strip of Velcro (soft "Loop" side of Velcro) to stick onto your flash
• 18 Velcro dots (rough "Hook" side of Velcro) to stick onto the ends of your gels.

30.00 $

In order to attach the gels to your flash you will want to stick the soft ("loop") sided velcro on your flash. I prefer to lay down a layer of gaffer's tape on my flashes first so that if I decide to sell my flash down the road, I can remove the velcro without leaving any sticky residue on the plastic.

Step 1: Measure and cut the velcro into 4 pieces for the sides of the flash.

Step 2: Attach the velcro to the 4 sides of the flash.

Step 3: Stick the velcro dots on the ends of all the gels.

Step 4: Attach the gel to the flash. Make sure you leave a small gap of air between the gel and the flash. This allows heat generated by the flash to safely escape and not heat up the gel.

When using a Stoffen diffuser on your flash, put the gel on first and slide the Stoffen on top of it.